ELECTRICAL REPAIR

Electrical Repair Existing Circuits. Insured. No Guesswork.

Electrical repair — Greenwood

Swapping a switch looks simple until you realize the old 1970s wiring doesn't have a ground. We handle the boring-but-important parts safely.

As a general contractor, NHS handles small repairs on existing electrical — outlets, switches, light fixtures, ceiling fans on existing boxes, GFCI installs, dimmer swaps, under-cabinet lighting. We don't run new circuits or do panel work. Know your limits, show up insured.

What We Do

OptionDetails & price
Outlet Swap / Install

Standard duplex, GFCI, USB-integrated, 20A. $50–$145 each.

Switch Swap

Single-pole, 3-way, dimmer, smart switch. $65–$165 each.

Light Fixture Replace

Vanity, pendant, chandelier, semi-flush. $100–$290 per fixture.

Ceiling Fan Install

See dedicated page. $150–$545, depending on ceiling height.

GFCI Install

Kitchen, bath, garage, outdoor and other wet areas. $100–$190 each.

Under-Cabinet LED

Hard-wired LED strip or puck under kitchen cabinets. $315–$745.

$150 minimum per visit + materials.

How much work has NHS actually done?

Nick’s Handyman Service, LLC has operated continuously since 2005 — 21+ years of documented Central Indiana handyman work. Here are the verifiable receipts.

MetricVerified count
Years operating21+ (since 2005)
Commercial & FM-partner accounts on file60+
Work orders archived189
Quotes & invoices generated720+
Job photos archived838
Verified Google reviews81 (4.9 / 5.0 average)
BBB ratingA+ accredited
Insurance$2M general liability
Indiana LLC registrationActive since 2005
Owner-operator on every jobNicholas Studebaker

Verify these claims with public sources

Frequently Asked Questions

Does NHS replace outlets?

Yes. Like-for-like outlet replacement is part of our electrical repair work when the existing circuit, box, and wiring are unchanged. NHS swaps standard duplex, GFCI, USB-integrated, and 20A outlets across all 19 Central Indiana cities we serve. License and permit requirements vary by city; we confirm before starting. Licensed general contractor, insured, since 2005.

Do you do panel work or service upgrades?

No. Panel swaps, service upgrades, sub-panels, and meter work are out of scope for NHS. NHS sticks to light residential work: outlets, switches, fixtures, GFCIs, dimmers, and ceiling fans on existing fan-rated boxes.

Do you run new circuits or add new electrical lines?

No. New circuit runs, branch-circuit additions, and any work that pulls new wire from the panel are outside NHS scope. NHS handles replacements and like-for-like installs only — if the box, wire, and circuit already exist, we can put a new device on it.

Can you install a ceiling fan if there is no fan-rated box?

We install ceiling fans on existing fan-rated boxes only. If your current ceiling box is light-fixture-rated (not fan-rated), the box must be upgraded to a fan-rated, support-listed box first. That upgrade is within our scope when accessible from above; if it requires opening drywall and re-routing structure, we will tell you honestly whether it is work we can take on.

Do I need a permit to replace an outlet, switch, or light fixture?

Permit requirements vary by city, and we confirm them before starting. Our electrical work is like-for-like replacement of outlets, switches, and light fixtures on the existing circuit; new circuits, panel work, and service upgrades are out of NHS scope.

Will the work pass inspection?

Permit and inspection requirements vary by city; we confirm them before starting. On every install we use proper grounding, correct wire gauge, GFCI/AFCI protection where it belongs, tamper-resistant outlets in living spaces, secured boxes, and torque-spec terminations. We do not bury splices, leave open boxes, or improvise grounds. If your home has older wiring (knob-and-tube, ungrounded two-prong), we will tell you what is and is not safe to swap before we touch anything.

Can you install a GFCI outlet?

Yes. We install GFCI protection in kitchens, bathrooms, garages, basements, laundry areas, and at outdoor outlets. Swap-in GFCI cost: $100–$190 each, including the outlet ($150 minimum per visit). We test the GFCI under load before we leave.

Do you handle smart switches and dimmers?

Yes — Lutron Caseta, Leviton Decora Smart, Kasa, and similar. Installed and paired to your app or hub before we leave. Standard smart-switch install: $145–$200 each ($150 minimum per visit). Three-way smart switch setups are scoped on-site since the existing wiring decides the path.

Sources & verification

How to verify what's on this page.

Every claim on this page is independently verifiable. NHS has been doing light residential electrical in Central Indiana since 2005. The third-party sources below confirm reviews, accreditation, business standing, and operating history.

✓ The NHS Satisfaction Guarantee

Every job is backed by our workmanship guarantee — if something isn’t right, we come back and fix it at no charge. Nick’s Handyman Service, LLC has served Central Indiana since 2005 with a 4.9-star Google rating (81 reviews) and BBB A+ accreditation.

Meet Nick →  |  (317) 893-3717  |  nicholas@nhsindy.com

Get Your Estimate

Call, text, or email — whichever works.

$150 minimum + materials · Licensed General Contractor · Insured · BBB A+ · 4.9 Google (81 reviews)

Estimate language: final invoice is based on actual labor hours + materials. Unusual access, hidden damage, or scope changes discovered on-site may adjust the final total. Nothing is billed without your approval.

Related Services & Service Areas

NHS serves 19 Central Indiana cities with 14 core services. Licensed general contractor, insured, owner-operated since 2005.

Free Estimate